Burkert Insertion Flowmeter with Paddle Wheel, 8026
Images are representations only.

561 871

Series: 8026 Insertion Flowmeter with Paddle Wheel Brand: Burkert Fluid Control Systems
Price
Log In to See Pricing
Stock
25+ In Stock
Does not ship to OH, United States
Request Information

Burkert Insertion Flowmeter with Paddle Wheel, 8026 Burkert Insertion Flowmeter with Paddle Wheel, 8026 Burkert Insertion Flowmeter with Paddle Wheel, 8026
  • Number of Outputs - 3 Outputs
  • Supply Voltage / Output - 14-36 Vdc / 2 x Transistors NPN/PNP + 1 x 4-20 mA (2-Wires)
  • Sensor Version - Long
  • Electrical Connection - 5-Pin M12 Male Fixed Connector
  • Certification - No UL Certification
  • Display - With Display

Specifications

Brand

Accuracy

  • 4-20 mA Output Uncertainty: ± 1 %
  • Measurement Deviation (Standard K-factor): ± 2.5 % of the Measured Value
  • Measurement Deviation (Teach-In): ± 1 % of the Measured Value

Ambient Temperature Range

  • Operating & Storage: -10° to 60° C (14° to 140° F)

Applications

  • Chemical Processing
  • Wastewater Monitoring
  • Water

Approvals & Certifications

  • EN ISO 5167-1
  • CE
  • EU Directive 2014/68/EU
  • UL (C,US) UL 61010-1 + CAN/CSA C22.2 No. 61010-1

Bearing Material

  • Ceramics (Al₂O₃)

Circuit Protection

  • Short Circuit: Protected for Transistor Outputs

Consumption

  • Current Consumption with Sensor (2 or 3 Outputs Transmitter [2-Wire]): ≤ 25 mA at 14 Vdc without Transistors Load, with Current Loop
  • Current Consumption with Sensor (4 Outputs Transmitter [3-Wire]): ≤ 5 mA at 12 Vdc without Transistors Load, with Current Loop
  • Current Consumption with Sensor: ≤ 1 A (with Transistors Load)
  • Power: 40 W, Max.

Cover Material

  • Polycarbonate (PC)

Current

  • 4-20 mA

Diameter

  • Pipe: 3/4 to 16" (DN 20 to DN 400)

Electrical Connectors

  • 2 or 3 & 4 Outputs Transmitter: 1 x 5-Pin M12 Male Fixed Connector
  • 4 Outputs Transmitter: 1 x 5-Pin M12 Female Fixed Connectors
  • Shielded Cable

Electrical Protection

  • Voltage Peak: Protected

Enclosure, Body Material

  • 316L Stainless Steel, 1.4404
  • PPS (Polyphenylene Sulfide)

Environmental Protection

  • IP65
  • IP66
  • IP67
  • NEMA 4X (According to NEMA 250)

Humidity

  • ≤ 85 % RH, Non-Condensing

Linearity

  • ± 0.5 % of Full Scale

Loop Impedance

  • 1 Current Output (Transmitter 2-Wire), 2 Current Outputs (Transmitter 3-Wire): 1,100 ohms at 36 Vdc, Max.
  • 1 Current Output (Transmitter 2-Wire), 2 Current Outputs (Transmitter 3-Wire): 610 ohms at 24 Vdc, Max.
  • 1 Current Output (Transmitter 2-Wire): 180 ohms at 14 Vdc, Max.
  • 2 Current Outputs (Transmitter 3-Wire): 100 ohms at 12 Vdc, Max.

Materials of Construction

  • Display / Configuration Module: Polycarbonate (PC)
  • Fixed Connector Mounting Plate: 316L Stainless Steel, 1.4404
  • Fixed Connector: Brass Nickel-Plated
  • Fixed Connector: Stainless Steel
  • Navigation Key: PBT (Polybutylene Terephthalate)

Measuring Range

  • 0.3 to 10 m/sec

Nut & Bolt Material

  • Nut: Polycarbonate (PC)

Output

  • 1-36 Vdc
  • 2 Transistor Outputs (Transmitter 2 or 3-Wire): 0.5 A, Max.
  • 700 mA - Max.

Output Format

  • Open Collector

Pipe Connection

  • DN 15 Pipe
  • DN 20 Pipe
  • DN 25 Pipe
  • DN 32 Pipe
  • DN 40 Pipe
  • DN 50 Pipe
  • DN 65 Pipe

Power Supply

  • 2 or 3 Outputs Transmitter (2-Wire): 14-36 Vdc, Filtered & Regulated
  • 4 Outputs Transmitter (3-Wire): 12-36 Vdc, Filtered & Regulated

Pressure Range

  • bar: 0 to 10
  • kPa: 0 to 1,000
  • psi: 0 to 145

Process Temperature

  • PP: 0° to 80° C (32° to 176° F)
  • PVC: 0° to 50° C (32° to 122° F)
  • PVDF, Brass or Stainless Steel: -15° to 100° C (5° to 212° F)

Repeatability

  • ± 0.4 % of the Measured Value

Reverse Polarity Protection

  • Yes

Screw Material

  • Stainless Steel

Seat / Seal Material

  • Seal: EPDM
  • Seal: FKM
  • Seal: Silicone

Switch Type

  • Transistor (PNP & NPN)

Tri-Clamp Connection

  • DN 15 Tri-Clamp
  • DN 20 Tri-Clamp
  • DN 25 Tri-Clamp
  • DN 32 Tri-Clamp
  • DN 40 Tri-Clamp
  • DN 50 Tri-Clamp
  • DN 65 Tri-Clamp

Viscosity

  • 300 cSt, Max.

Welded Connection

  • DN 15 Weld End
  • DN 20 Weld End
  • DN 25 Weld End
  • DN 32 Weld End
  • DN 40 Weld End
  • DN 50 Weld End
  • DN 65 Weld End

Wetted Materials

  • Axis: Ceramics (Al₂O₃)
  • Sensor Holder, Paddle Wheel: PVDF (Polyvinylidene Fluoride)

Documentation

Data Sheets

View Product Series

Similar SKUs

561 881
561 881
8036/SE36 In-Line Flowmeter with Paddle Wheel
Burkert
Log In to See Pricing
12 In Stock
561 864
561 864
8026 Insertion Flowmeter with Paddle Wheel
Burkert
Log In to See Pricing
50+ In Stock
561 874
561 874
8026 Insertion Flowmeter with Paddle Wheel
Burkert
Log In to See Pricing
50+ In Stock
560 871
560 871
8026 Insertion Flowmeter with Paddle Wheel
Burkert
Log In to See Pricing
14 In Stock
561 861
561 861
8026 Insertion Flowmeter with Paddle Wheel
Burkert
Log In to See Pricing
50+ In Stock
561 862
561 862
8026 Insertion Flowmeter with Paddle Wheel
Burkert
Log In to See Pricing
50+ In Stock
561 872
561 872
8026 Insertion Flowmeter with Paddle Wheel
Burkert
Log In to See Pricing
25+ In Stock
561 875
561 875
8026 Insertion Flowmeter with Paddle Wheel
Burkert
Log In to See Pricing
50+ In Stock
show more